Plane Programming Guide

• DED programming

There are 4 bytes added to each DED message row with a bitmap where each bit is the status of the corresponding fields in the DED Message array (from 0 to 24) when the bit is ON (1) the relative DED message char is in reverse e.g. bit 0 ON byte[0] is in reverse

in this representation take care that the array has to be read from zero in left side and bitmap the 0 is in the right side (like in BIN)
Tex: and Set: is the way the array and bitmap are scrolled
of course if bit is set to 1 the 'normal' char should be replaced by 'reversed' char or displayed in reverse mode (depending on Hw Display feature and used font)

• DCS-Bios F-16 DED Display Export Technical Specification